PLX31-MBTCP-MBS4 ProSoft EtherNet/IP to Modbus Serial Gateway

PLX31-MBTCP-MBS4 ProSoft EtherNet/IP to Modbus Serial Gateway

Packaging & Delivery

Shipping Port: Xiamen, China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account 
Service: Professional Sales provides 24 hours /7 days online service

Product Details

Specification Description 
Command List Up to 100 commands per Master port, each fully configurable 
for Function Code, slave address, register to/from addressing 
and word/bit count. 
Supported Modbus 
Function Codes 
1: Read Coil Status 
2: Read Input Status 
3: Read Holding Registers 
4: Read Input Registers 
5: Force (Write) Single Coil 
6: Preset (Write) Single 
Holding Register
15: Force (Write) Multiple Coils 
16: Preset (Write) Multiple 
Holding Registers 
22: Mask Write Holding Register 
(Slave Only) 
23: Read/Write Holding 
Registers (Slave Only) 
Software configurable 
communication 
parameters 
Baud rate: 110 baud to 115.2 kbps 
Parity: None, Even, Odd 
Data Size: 7 or 8 bits 
Stop bits: 1 or 2 
RTS on/off delay: 0 to 65535 milliseconds 
Modbus RTU mode (binary) with CRC-16 
Modbus ASCII mode with LRC error checking 
Floating Point Data Floating point data movement supported, 
including configurable support for Enron and Daniel 
implementations 
Polling of Command List Configurable polling of command list, including continuous 
and on change of data, and dynamically user or automatic 
enabled. 
Status Data Error codes available on an individual command basis. In 
addition, a slave status list is maintained per active Modbus 
Master port. 
Node Address 1 to 247 (software selectable) 
RS Interface RS232, RS422, and RS485 
Transmit and Receive 
Buffer Size 
255 byte Transmit character length with 0 to 65535 
millisecond delay between each transmitted character

Specification Description
Backplane Current
Load
800 ma @ 5V (from backplane)
Operating
Temperature
0 to 60°C (32 to 140°F)
Storage Temperature –40 to 85°C (–40 to 185°F)
Relative Humidity 5 to 95% (non-condensing)
Shock 30g operational, 50g nonoperational
Vibration 5 g from 10150 Hz
LED indicators Module status, Backplane transfer
status, Application status, Serial
activity (debug port), Ethernet link
and activity, and error LED status
Debug/Configuration port (CFG)
CFG Port (CFG) RJ45 (DB-9M with supplied cable)
RS-232 only
No hardware handshaking
Configuration
Connector
RJ45 RS-232 Connector (RJ45 to
DB-9 cable shipped with unit)
Application Ports
Ethernet Port (Ethernet
Modules)
RJ45 Connector
Link and activity LED indicators

RELATED PRODUCTS

The following is my contact information, you are very welcome to come to me for inquiries:

Contact person：Niko
Email Address:：niko@fenoux.com
WhatApp： +86 13376987741