IC695PSA040J GE Industrial power supply module

Nominal Rated Voltage 
Input Voltage Range 
 AC 
 DC 
120/240 VAC or 125 VDC 
85 to 264 VAC 
100 to 300 VDC 
Input Power 
(Maximum with Full Load) 70 Watts maximum 
Inrush Current 4 Amps, 250 milliseconds maximum * 
Output Power 40 Watts maximum total 
5.1 VDC = 30 Watts maximum 
3.3 VDC = 30 Watts maximum 
The maximum total output power available depends on the ambient 
temperature, as shown. 
Output Voltage 24 VDC: 19.2 VDC to 28.8 VDC 
5.1 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal) 
3.3 VDC: 3.1 VDC to 3.5 VDC (3.3 VDC nominal) 
Output Current 24 VDC: 0 to 1.6 Amps 
5.1 VDC: 0 to 6 Amps 
3.3 VDC: 0 to 9 Amps 
Isolation (input to backplane): 250 VAC continuous; 1500 VAC for 1 minute 
Ripple (all outputs) 150 mV 
Noise (all outputs) 150 mV 
Ride-through time 20 ms. This is the length of time the Power Supply maintains valid 
outputs if the power source is interrupted 
Wiring Terminals Each terminal accepts one 14 AWG to 22 AWG wire. 
Current per Terminal 6 Amps 
Number of Daisy-Chained PSA040 
Supplies 
Up to 4